Scope of application

1、Template processingVarious types of steel required for production;The appearance quality and steel material must meet the national standards of genuine steel, and the carbon content of steel should be strictly controlled if necessary。

2、 Steel formworkFor the treatment of the corner of the panel, it must be preferred to bend on the bending machine, and according to the thickness of the steel plate 1 when the radius of the rounded corner is not required.5 times the bending radius。

结构

1, steel template combination;Each combination height 1200mm pier end side semi-circular edge and standard block combination, tray and pier cap decomposition combination, standard combination block 1700×1202mm rib spacing 3500×4500 rib height (panel + rib height) 86mm。

2, steel template processing for the preparation of the floor;The rib plate processing with special-shaped corners and faces must be welded on the clamp mold and shaped with the template repeatedly corrected, and it is strictly prohibited to make by hand。

3, steel template processing combination border processing into a buckle shape。

4, steel template standard combination section;During the processing of each segment, 8 holes are reserved for the tension bolt. /5. The total weld length of each weld at the cross combination weld of the inner rib of the steel template is ≥70% of the width of the floor。